Grain Mycotoxin Detector

Product Introduction:

HM-L02 Grain Mycotoxin Detector adopts the principle of fluorescence quantitative rapid detection, mainly detects the content of mycotoxins in grain and oil cereal feed, including aflatoxin B1, aflatoxin M1, zearalenone, vomitoxin, fumonisin, etc. The test samples cover grains (rice, corn, wheat, barley, sorghum, etc.) and their products, feed and its raw materials, edible oils and fats, milk and its products, etc.; the sample pretreatment is simple, and the whole test process is 12 minutes. The product is suitable for local grain depots, grain production enterprises, feed mills, various livestock breeding enterprises, flour mills, food processing plants, third-party testing agencies and government regulatory departments at all levels.

Product Features:

1. Extremely high stability: imported fluorescent microspheres are used, the particles are uniform, and the product stability is guaranteed from the source, and the reproducibility within and between batches is good. The reagent strip can be stored at room temperature without refrigeration. After the test, the reagent strip can be stored for one year after drying, and the results can be traced. The thermostat device is used, with one hole for each strip, automatic timing, and is not affected by external temperature and humidity, and is applicable to a wider range of sites.

2. Fast and accurate quantification: It combines the characteristics of colloidal gold rapidity, enzyme-linked immunosorbent quantitative, and chromatographic accurate detection to achieve fast and accurate quantitative detection;

3. Built-in quantitative standard curve: The instrument has a built-in standard curve, and there is no need to use standard products. There is no need to make a standard curve during detection, which not only saves costs, but also avoids the contact between operators and vomitoxin, protecting the safety of operators;

4. On-demand testing: There is no requirement for the amount of test samples. Single or a small number of samples can be tested on-demand, or a large number of samples can be tested at the same time, and on-site testing can be achieved;

5. Low supporting requirements: The requirements for supporting pre-treatment instruments and personnel are low, and operators only need short-term training to master them;

6. High cost performance: Spend one-third of the price of imported equipment to obtain the quality and results of chromatographic detection, and save manpower and material resources, greatly reducing the cost of detection.

7. Easy and convenient to use: The instrument has built-in operation videos for detection projects, and no professional training is required. You can watch the built-in operation videos of the instrument while doing experiments, which is easy and quick to get started.

8. Professional and worry-free: The sample curve can be customized according to user needs, and the curve information can be pushed remotely and wirelessly, without returning the instrument to the factory.

Technical parameters:

1. Measurement principle: Read the fluorescence quantitative detection card, compare the fluorescence signal intensity of the detection area (T line), quality control area (C line) and background area, and calculate the content of the target according to the standard curve built into the detection card.

2. Instrument display: 7-inch 1200*1920IPS screen display, no external computer is required;

3. Operating system: Android operating system, 1.5GHz eight-core processor, 2G running memory,

4. Printing: The instrument comes with a thermal printer, and the test results can be printed in real time.

5. Instrument measurement repeatability: ≤0.4%, stability: ≤0.6%

6. Repeatability of the same test strip CV≤0.4%

7. Inter-instrument precision CV≤3%

8. Light source: laser light source, 475nm, 525nm

9. Detector: photocell

10. When reading the signal, the scanning distance is 20mm, and the scanning range is at least 2mm redundant outside the C and T lines. The position of the CT line can be customized and accurately identified.

11. Detection and interpretation: The instrument has a power-on self-test function, and the detection card is read within 12S. The detection time of a single sample is less than 8S.

12. Detection method: automatic scanning.

13. The instrument automatically identifies the test items, sample types, detection limits, and standard curves on the test card barcode to form a complete test data information chain. One card, one control. After the card is inserted, the instrument automatically reads the fluorescence signals of the C and T lines displayed on the test card, and automatically calculates the results based on the standard curve built into the test card. Users can choose to set the detection limit/quantification limit (internal control or national standard limit) according to their own needs.

14. Test data information collection items (including but not limited to): The instrument supports at least the following test data collection: ① test items; ② sample type; ③ test samples; ④ national limit; ⑤ tester; ⑥ test unit; ⑦ test time; ⑧ test line/quantification limit; ⑨ test number; ⑩ internal control limit; ? sample source, etc., and supports remote expansion and upgrade of data collection items.

15. Test data collection method: The test data information collection items stated: ①-⑨ items are automatically identified and collected by the instrument, and ⑩-? items are handwritten input.

16. Test data upload method: After the test is completed, the instrument can automatically upload all the test data information stated in the test data information collection items to the test supervision system platform.

17. Interface: Bluetooth communication interface; built-in wireless WIFI, test data is transmitted to the data supervision platform in real time, and customers can view the test data in real time on the network through account login.

18. Storage space: 16GB storage space.

19. Information input: support Chinese and English handwriting input.

20. Local data management: with test data storage, query, batch data deletion and printing functions.

21. Test project management: the instrument supports the maintenance management of test projects and corresponding national limits such as remote addition and deletion.

22. Operation authority management: the instrument supports the function of test operators to log in to the instrument using account and password, and supports account and password verification on the supervision system platform.

23. Training and learning: built-in test project operation process video, teaching software can be updated online in real time.

24. Working temperature: 5-40℃, relative humidity: 10%-90%. Power supply voltage 220V±22V, frequency 50Hz±1Hz, rated power 40W, connection method with power supply: detachable power cord.

25. Constant temperature incubator

(1) Suitable for precise temperature control of quantitative colloidal gold test paper cards and reaction liquids to improve accuracy;

(2) The incubator has 6 card slots, and the time of each card slot is independently controlled;

(3) Automatic countdown after inserting the card strip, automatic alarm at the end of the countdown, and record the timeout time;

(4) Internal constant temperature control, temperature control temperature: 37℃, temperature control accuracy ≤0.5℃, heating speed ≤8min, temperature uniformity ≤0.3℃, real-time temperature display accuracy: 0.1℃.

26. Instrument size: 340*280*140mm

• Previous: Mycotoxin Rapid Detector
• Next: Mycotoxin detector