Current
Location:
17853698681
WhatsApp
Product Details1. Product Introduction
The SS03A portable multi-parameter water quality
meter is an electrode-based water quality analysis instrument that uses fully
digital electrode detection to detect water quality, water temperature, orp, and
pH parameters. The instrument is equipped with a self-developed ftiot operating
system, which is simple to operate, stable in performance, accurate in
measurement, and has a wide detection range. It has a built-in high-capacity
rechargeable lithium battery, which is convenient for users to conduct water
quality testing at any time in the field or laboratory.
2. Host parameters
Charging input voltage 4.5V-5.5V
Charging current <2A
Screen size 3.5 inches
Screen resolution 480*800 ☆
Screen
interface MIPI DSI ☆
USB interface 2 (supports external mouse, keyboard, 4G,
etc.) ☆
Type-C 1 (supports external mouse, keyboard, 4G, etc.) ☆
RS485 2
(supports Modbus, json, asc input, etc.)
External sensor power supply voltage 12V
External sensor power supply current 1A
Operating system ftiot (based
on Linux-5.4) ☆
CPU 2*Cotex-A7, 650Mhz ☆
RAM 512M DDR3 ☆
Flash 8G-64G
Open GL ES 2.0 ☆
Wifi support
4G optional
Button support
Capacitive touch screen support
Software architecture B/S ☆
Web
access support ☆
MTP mode support ☆
Multi-terminal login Support ☆
IPV6
Support ☆
Sensor communication mode RS485, TCP, UDP, Http ☆
Data
forwarding mode RS485, TCP, UDP, Http ☆
Remote SSH Support ☆
Remote
debugging Support ☆
Sensor parameters and configuration
No. Name Measurement range Principle Measurement accuracy Configuration Remarks
1 Temperature 0~50℃ High-precision digital sensor ±0.3℃ ✔
2 pH 0~14 (ph) Electrochemical (salt
bridge) ± 0.1PH ✔
3 ORP -1500mv~1500mv Electrochemical (salt bridge) ± 6mv
4 Conductivity 0~5000uS/cm,0~10000uS/cm Contact electrode method ± 1.5% ✔
5 TDS 0～20 μS/cm (TDS 0-10 mg/L) Contact electrode method ±1.5%
6 Salinity 0-2.5ppt or 0-80ppt Contact electrode method ±0.05ppt or ±1ppt
7 Sludge concentration 0-20.000g/L Scattered light method ±5% (depending on sludge homogeneity)
8 Turbidity 0-40NTU (low turbidity) Scattered light method ±
1%
Optional
0-1000NTU (medium turbidity) Scattered light method ±
1%
0-3000NTU (high turbidity) Scattered light method ± 1% ✔
9 Dissolved
oxygen 0-20mg/L Fluorescence lifetime method ± 2% ✔
10 Ammonia nitrogen 0-100mg/l Ion selective electrode method ±1mg ✔
11 Suspended matter 0-2000mg/L Scattered light method ±5% (depending on sludge homogeneity)
12 Residual chlorine 0~5.00 mg/L Ion selective electrode method ±5% of
reading The best accuracy is achieved when the flow rate is 0.42m/s-0.85m/s
13 Chloride ion 0-3500.0mg/L Ion selective electrode method
±5%
14 Total hardness 0～1000.0mg/L Ion selective electrode method ±10% of
reading
15 cod 0~500mg/ L UV254 absorption method ±5% ✔ COD and chlorophyll are equipped with automatic cleaners to prevent biological attachment and avoid light window pollution to ensure long-term monitoring is still stable; the automatic cleaning time and cleaning times can be set, and the power consumption is 0.7W
16 Chlorophyll 0~400ug/L Fluorescence method R2>0.999
- Previous: Handheld Aquaculture Testing Instruments
- Next: Water Suspension Tester
Related Products
